Profile image

Project 56 kotlin class destroyer

41.1k Rafalemmm  2.2 years ago

_ The construction of the ship is my attempt to build warships in World War II. After that, there will be a construction plan of a Cold War Soviet cruiser derived from World War II_

In my opinion, this construction is not a success because the count of some parts is out of control, resulting in higher than expected part counts. Then I tried to cut some parts to control the partcounts, but the price is still not low

2700parts Low Part Version

Introduction

Kotlin-class destroyers were Cold War era ships built for the Soviet Navy. The Russian name for this class was Project 56 Spokoiny . 27 ships were built between 1955 and 1958; they were all decommissioned in the late 1980s. The Kildin class is based on the design of the Kotlins. The Chinese Luda class which is based on the Soviet Neustrashimy class, also borrows some design concepts from the Kotlin class.

563.png

This design was a smaller version of the Neustrashimy-class destroyer which was seen as being too large and expensive for economic series production, as well as too slow. Detailed design changes eliminated some of the problems seen during trials of Neustrashimy. A production run of 100 ships was planned but this was curtailed because of the advent of the guided missile. 32 were ordered, but four ships were completed as the Kildin class (Project 56E/EM). The last vessel was canceled.Project 56 was the last artillery torpedo destroyer built by the Soviet Union .Project 56 has good airworthiness and high speed and abundant power, so it will become a platform for anti-submarine and air defense missions

561.png

Weapons

2 × 5×533mm Tropedo

2× CM-2-1 130mm naval Gun

4× CM-20ZIF 45mm AAGuns

4a284b845357c461.png

Control

Throttle and Brake for Forward and back

Yaw for Rudder

Trim for Tropedo

all Turret are Auto-Aimed like this

bili<em>v</em>1647593999826.gif

Have Fun!!!

564.png

Spotlights

General Characteristics

  • Created On Windows
  • Wingspan 39.8ft (12.1m)
  • Length 370.1ft (112.8m)
  • Height 84.2ft (25.7m)
  • Empty Weight 320,034lbs (145,165kg)
  • Loaded Weight 362,158lbs (164,272kg)

Performance

  • Power/Weight Ratio 0.223
  • Horse Power/Weight Ratio 0.001
  • Wing Loading 11.5lbs/ft2 (56.0kg/m2)
  • Wing Area 31,600.8ft2 (2,935.8m2)
  • Drag Points 24139

Parts

  • Number of Parts 5414
  • Control Surfaces 0
  • Performance Cost 13,684
  • Log in to leave a comment
  • Profile image
    41.4k sakkijarven

    显卡的香气

    +3 2.2 years ago
  • Profile image
    225 VrawlYT

    Crazy

    +1 2.2 years ago
  • Profile image
    3,319 Th3rmoplylae

    @NeinNeinbruh they died a few decades ago

    +1 2.2 years ago
  • Profile image
    2,999 NeinNein

    @Th3rmoplylae he kidnapped the designers

    +1 2.2 years ago
  • Profile image
    315 Sunrising

    《lower part counts》

    +3 2.2 years ago
  • Profile image
    3,319 Th3rmoplylae

    I swear he’s getting the actual blueprints.

    +3 2.2 years ago
  • Profile image
    4,687 Timewolf

    @Rafalemmm 懂了

    +1 2.2 years ago
  • Profile image
    41.1k Rafalemmm

    @MarisaKujo sdl,ilil

    +1 2.2 years ago
  • Profile image
    9,875 MarisaKujo

    tql, wsl

    +1 2.2 years ago
  • Profile image
    41.1k Rafalemmm

    @Timewolf 1.ocean mod plz
    2.只要我散布够大射速够快这就不是问题,当然也可以用代码解决

    +2 2.2 years ago
  • Profile image
    4,687 Timewolf

    两个问题:1、为什么你的海那么波涛汹涌,我的海静如死水😂
    2、ai炮塔的实现方法(cockpit和炮塔距离太远的话不会有偏差吗)

    +1 2.2 years ago
  • Profile image
    3,930 ANWD

    It's like a RF Admiral Panteleyev

    +1 2.2 years ago
  • Profile image
    5,649 MSRM

    Good!

    +1 2.2 years ago
  • Profile image

    @PorterTM if you have a good PC, go for it. It's not that much of a monster. My medium end PC can't.

    +2 2.2 years ago
  • Profile image

    @EternalDarkness thanks i was about to download this

    +1 2.2 years ago
  • Profile image
    3,611 Dathcha

    I cant use it but hey it looks good

    +2 2.2 years ago
  • Profile image

    Very impressive build, though a bit heavy on the part count. I can't run it, but from what I can see, details on it are amazing. Good work.

    +1 2.2 years ago