In this FT, either AG will activate the rotator when selected separately or both on at the same time:
Activate1 | Activate4
This FT states that either AG will activate the rotator, but then deactivate when both are selected or both are deselected:
(Activate1 & (Activate4 != 1)) | ((Activate1 != 1) & Activate4)
@LESPACE Welcome! The first thing you'll want to do is switch on the battery and the APU starter from the overhead console; treat it like a MSFS B777. Then, above the throttle levers are the switches to control the lower display, which will guide you thru the checklists. Hope this helps!
{(Activate5) ? "<color=green>" : "<color=white>"} PUT STUFF HERE <color=white>
What's happening in that line is I'm stating that Activate 5 will turn the STUFF green, and in all other cases, it will be white. I put a second <color=white> after the STUFF to restore the original format, after every STUFF, as I've found that the following line of code doesn't always cooperate unless we keep things tidy. You can put all sorts of code into those <color> spots from the line, including <alpha=#00> to make the STUFF transparent. You can also replace the color words for actual HEX <color=#FFFFFF>.
The line is good to copy and paste directly into your in-game text.
I hope this is somewhat useful, and hopefully I explained it adequately!
@Erc90F4RU is it not friendly for your device? I have no issues running 1,000 parts on my mobile... this build will end up being about 1,000 parts too.
@Timplanes that is such a great offer! Yes please. On a technical level, im familiar with the systems and programming of a 777, but shape-wise, im struggling (as is obvious in the body so far). Anything you could offer would be greatly appreciated. Thank you friend!!
@Erc90F4RU I'm sorry about that my friend!!! All the tiny details in the cockpit cost so many parts, this plane started at 600 parts before I did the cockpit 😂
@PlaneFlightX that's an incredibly detailed cockpit on your SWL-10, and tbh I sorta geeked out while playing with it haha. Thank you friend! I'll likely refer to your cockpit for more complex variables definitely, as right now mine is still just basic conditioning and using the "&" all over the place haha.
@Erc90F4RU im sorry friend, I get carried away and use so many parts haha. But thank you for the upvote and spotlight, even though its not mobile friendly, i appreciate it 🙏😊
@Boeing777x tbh I was getting desperate to save on part count so I started clearing out the cabin... that cockpit is soaking up all the attention and detail haha. I think I'm just a few breakthrus away from a simple autopilot and stuff so thats fun. Thank you!
@Boeing777x I haven't settled on a specific layout, but it'll be turboprop... needless to say my success with props has been spotty at best. But thats the best part about this game, its quite humbling and always learning new techniques and skills.
@Boeing777x Thank you! I must say that the wings were extra special... they had to be redone maybe a dozen times, but well worth it. And she really forced me to dive deep and educate myself in some areas. Also i did her dirty with such a pitiful back history, i feel like she deserved better 😂. Im so glad you like it! My next liner is more modern so hopefully there won't be a thousand little switches everywhere haha
@Boeing777x its definitely a step in the right direction, and this one was so much fun to work on i sorta overlooked a few small details before publishing, but I couldn't resist haha. So glad you like it!
Very nice! And the flight stability isn't bad at all as far I can tell.
+1The effort and detail you put into this is inspiring. The 777 is always terrific, but you really did her justice here
+1In this FT, either AG will activate the rotator when selected separately or both on at the same time:
+1Activate1 | Activate4
This FT states that either AG will activate the rotator, but then deactivate when both are selected or both are deselected:
(Activate1 & (Activate4 != 1)) | ((Activate1 != 1) & Activate4)
The fact that you even shared the original concept and early models breathes so much life into it. Love that it's an original design as well.
+1Absolutely underrated. Incredible build!!
+1The attention to detail is amazing!! Beautiful
I absolutely LOVE KLM livery. Beautiful build! All the little details bring it together, and the effort put in really shows.
@BaconX69
@ToeTips
@Sense2
Thank you for your interest and taking time to visit. I will tag you in the latest test, please disregard out-of-place text boxes, lol.
@LESPACE Welcome! The first thing you'll want to do is switch on the battery and the APU starter from the overhead console; treat it like a MSFS B777. Then, above the throttle levers are the switches to control the lower display, which will guide you thru the checklists. Hope this helps!
+1This is so helpful, thank you for sharing!
@GorillaGuerrilla
{(Activate5) ? "<color=green>" : "<color=white>"} PUT STUFF HERE <color=white>
What's happening in that line is I'm stating that Activate 5 will turn the STUFF green, and in all other cases, it will be white. I put a second <color=white> after the STUFF to restore the original format, after every STUFF, as I've found that the following line of code doesn't always cooperate unless we keep things tidy. You can put all sorts of code into those <color> spots from the line, including <alpha=#00> to make the STUFF transparent. You can also replace the color words for actual HEX <color=#FFFFFF>.
The line is good to copy and paste directly into your in-game text.
I hope this is somewhat useful, and hopefully I explained it adequately!
+2@Erc90F4RU is it not friendly for your device? I have no issues running 1,000 parts on my mobile... this build will end up being about 1,000 parts too.
@Timplanes Thode docs are incredibly detailed. Super useful. Thank you for that!
+1@Timplanes
@Erc90F4RU
@ThomasRoderick
Thank you all for the upvotes and visiting! It's hugely appreciated
+1@ThomasRoderick Thanks Tom! I appreciate you always my friend!
@Timplanes that is such a great offer! Yes please. On a technical level, im familiar with the systems and programming of a 777, but shape-wise, im struggling (as is obvious in the body so far). Anything you could offer would be greatly appreciated. Thank you friend!!
@AndrewGarrison
Thank you for visiting and even leaving an upvote!
@ThomasRoderick
+1Thank you friend for leaving an upvote, much appreciated!
@ImpenetrableChaos
Thank you kindly for visiting and the upvote! Much appreciated!
@Erc90F4RU I'm sorry about that my friend!!! All the tiny details in the cockpit cost so many parts, this plane started at 600 parts before I did the cockpit 😂
@Ordinaryplanebuilder
Thank you for visiting and leaving an upvote! Much appreciated!
@AnomalyYeet
Thank you kindly for the upvote and even a spotlight! Much appreciated
Thank you for the upvotes!
+1@Sergio666
@Tammatt
Thank you for the upvotes!
+1@ThomasRoderick
@CanadianAircraftBuilder
@Boeing777x thank you friend! She was a challenge but worth the effort 100%. Glad you like it!
@Varrell007 my absolute pleasure! This is amazing work, easily worth 10 spotlight. I can't wait to see what's next!
+1@PlaneFlightX that's an incredibly detailed cockpit on your SWL-10, and tbh I sorta geeked out while playing with it haha. Thank you friend! I'll likely refer to your cockpit for more complex variables definitely, as right now mine is still just basic conditioning and using the "&" all over the place haha.
+1Thank you for the upvotes and visiting!
+1@ThomasRoderick
@Sergio666
@Erc90F4RU im sorry friend, I get carried away and use so many parts haha. But thank you for the upvote and spotlight, even though its not mobile friendly, i appreciate it 🙏😊
@Boeing777x indeed, it a slow process, but im happy with it so far.
@IliyaSaifiAviation
Thank you so much for the upvotes!! Greatly appreciated friend
@Boeing777x thank you! I'm having a blast with this one, and she's quite the challenge but so worth it
+1@Sergio666
Thank you for visiting and leaving an upvote, and even a spotlight!! Hugely appreciated friend!
+1@ThomasRoderick
@DameTheMobileFriendly
Thank you all for visiting and leaving an upvote!
+2@Boeing777x tbh I was getting desperate to save on part count so I started clearing out the cabin... that cockpit is soaking up all the attention and detail haha. I think I'm just a few breakthrus away from a simple autopilot and stuff so thats fun. Thank you!
@Sergio666 Thank you for leaving an upvote, friend!!
+1@ApplejuiceYT2
+2@ThomasRoderick
@BeastHunter
Thank you all kindly for the upvotes!!
@Reworkable Sorry about that! I did a quick edit without the mods here. And thank you for the upvote!! Much appreciated.
+1@ThomasRoderick
+1Thank you for the upvote friend!
That livery is so amazing, I cant even imagine the time or the patience needed for so much detail, im blown away!
+1@SkyBoogie1the1original
Thank you for visiting and even a spotlight! Much appreciated!
@Boeing777x I haven't settled on a specific layout, but it'll be turboprop... needless to say my success with props has been spotty at best. But thats the best part about this game, its quite humbling and always learning new techniques and skills.
@Boeing777x Thank you! I must say that the wings were extra special... they had to be redone maybe a dozen times, but well worth it. And she really forced me to dive deep and educate myself in some areas. Also i did her dirty with such a pitiful back history, i feel like she deserved better 😂. Im so glad you like it! My next liner is more modern so hopefully there won't be a thousand little switches everywhere haha
I love it, she's glorious!!
+3@HOPKINS234 my absolute pleasure!! This bird is a marvel of detail and skilled building, impressive and inspiring!
+1@Boeing777x its definitely a step in the right direction, and this one was so much fun to work on i sorta overlooked a few small details before publishing, but I couldn't resist haha. So glad you like it!
@Titaninfernal1
@Timplanes
@ThomasRoderick
Thank you all for the upvotes and taking time to visit! Greatly appreciated!
+1@Fineilldoitmyself
@DARZAVIATIONOFICIAL
Thank you both for visiting, and thank you for leaving an upvote!
+1@PlaneFlightX
@ayou2005
@50CalChicken
@Foodtastegood4K
@F1849
@SeikoPlane
@leftwaffel
Thank you all for visiting and upvotes!