Nice build. However, I noticed a shape issue on the horizontal stabilizer main fuselage. Also the ground handling is a bit weird (I think front wheels don't have enough grip). Also it glides a bit too much lol
But overall it looks good and it flies good ! Keep it up !
Argh !!! I love this plane now !!
Seriously, very nice build. The startup is enough simple to be satisfying, and not too complicated. Btw this sound ! It's really great. Thank you for this build, I really like it.
And yeah, like said earlier in the comments, the gauges arrows doesn't spin right. it's because <rotate> applies to the center of the arrow, and not its edge.
Are you sure it's not a 747 ? If you look at the previous flights, you can see that it performed a flight from Mumbai to Everett, which looks complicated with a MD80...
Edit: look at this
@MalcolmOn There is a lot of detailed blueprints online. As I said I can't do anything for the moment, but I can do a small part of the plane like landing gears if you want.
@hpgbproductions I'm not sure this is possible, unless making a code that mimic the behaviour of a floppy rotator.
I think the easiest way is to do the same as in real life, with mechanical assemblies.
To do that you should add a shock absorber part between your 2 parts connected to your hinge (with a floppy hinge at each end of the shock absorber), like this it will have a default orientation when there is no force, but it can rotate. You can also add a piston with the shock absorber if you want to set a specific default orientation when the gear is extended.
@Haans63612 They needed to lift a 747 glider
For information, two-seater modification of Ricardo's Mirage 2000P
By putting "anti-something" on your plane, don't be surprised to receive complaints
Nice build, it also looks like the Challenger 800 ! Why not making replicas ? I think you have a lot of potential !
+1@Apollo018362 That's just things to check of your future builds
Nice build. However, I noticed a shape issue on the horizontal stabilizer main fuselage. Also the ground handling is a bit weird (I think front wheels don't have enough grip). Also it glides a bit too much lol
+1But overall it looks good and it flies good ! Keep it up !
Look at this document. You will find some variables that affects missile maneuverability.
@ZacOnTrack it has a poor Pitch manoeuverability, and ailerons that are too effective.
Just saying that for your future builds.
Argh !!! I love this plane now !!
Seriously, very nice build. The startup is enough simple to be satisfying, and not too complicated. Btw this sound ! It's really great. Thank you for this build, I really like it.
And yeah, like said earlier in the comments, the gauges arrows doesn't spin right. it's because <rotate> applies to the center of the arrow, and not its edge.
Looks good, but flying is a bit weird.
Very nice as always
+1@L1nus Looks nice ! I think it's the first one with a walker animation. Don't make it too fast, lol !
@L1nus Alright. Thank you for the information !
@L1nus Oh I thought they completely removed the ability to see the pictures in external websites, but they probably put a delay instead.
@L1nus Yep. Is there a time to see it or something like that on your site ? it intrigues me
Can't see the pictures, is that normal ? I don't see them on any of your posts
Maybe it's me, idk
"plane was made by AI" duh... I think it hasn't been done yet... lol
+1It reminds me a lot the corvette
+1He's back !
"if you want to make the engine powerful", yeah, the only thing that inspires us is to make a dragster
+1@Capronistipa5927 When I tested your build I've taken for reference the Arado AR234, because yours is similar in category and role
+1@Hiiamhere Yep, I think too.
A good build. However, it looks a bit too heavy...
+1Also the bombs close to the ground are not very safe lol
Not bad for a first plane ! Next time can you add a functionnal tail wheel ?
+1Seriously
I can. Disclaimer: I don't have a very powerful computer (~1500 parts max).
I hope there will be weapons limitations though, otherwise it will be unplayable
It's really scary, I don't know what to think about it. But I don't think it's the serveur shutting down, because they would have notified us.
Basically decals
+1@kasachstanball Idk if you understand, but your wings are kinda high, so I can't attach the landing gears to them
@kasachstanball I'm sorry but I looked at your build and its geometry make it almost impossible to adapt a tilted landing gear.
Quality will be rewarded contrary to quantity
Are you sure it's not a 747 ? If you look at the previous flights, you can see that it performed a flight from Mumbai to Everett, which looks complicated with a MD80...
+1Edit: look at this
@ZacOnTrack Nice job on the livery tho, it's beautiful
Nice looking (some great details like the 2nd engine intake), but it doesn't fly well. I see you used less than the normal wing area, why ?
Well, I'm not sure it was designed to resist 30G, but okay...
+1Not bad, but the reverse thrust is useless considering the braking force of the wheels (you can edit it with XML)
@kasachstanball That's not very accurate, something like the A330 landing gear could be suitable ?
@kasachstanball Okay, send me a link and tell me how the landing gear should be, because in this case there is no real life aircraft
Yeah, I can help you. But one question: regarding your posts, does it looks like a real plane ? lol
Search "Chromate primer" color on google and choose the right one. I don't think you will be able to obtain the exact color code used by Airbus.
+2This new wright runway looks very good
smoll
+1Very nice, as always.
+2Nice build, realistic shape and performance. I had the opportunity to see it in flight few months ago.
+159.21.48.116 works sometimes
@MalcolmOn There is a lot of detailed blueprints online. As I said I can't do anything for the moment, but I can do a small part of the plane like landing gears if you want.
@EasternAviation2015 I was talking about an SP.com post
@hpgbproductions I'm not sure this is possible, unless making a code that mimic the behaviour of a floppy rotator.
I think the easiest way is to do the same as in real life, with mechanical assemblies.
To do that you should add a shock absorber part between your 2 parts connected to your hinge (with a floppy hinge at each end of the shock absorber), like this it will have a default orientation when there is no force, but it can rotate. You can also add a piston with the shock absorber if you want to set a specific default orientation when the gear is extended.
That's kinda useless, but it's funny how your tried to access these hidden pages
+1