Flight profile:
1. Put trim up at max, pull VTOL down.
2. AG1 for Main engine start up.
3. AG3 to release the Launch clams (it's best to release the vehicle 5s after Main engine start up!).
4. Use Pitch & Roll control to gimble the nozzle. To roll, use Yaw control.
*MECO start at 450 mph
5. To Execute MECO, put the trim back at 0 (which is right in the middle),then AG1 off.
*Right after MECO, pull the trim back up.
6. AG2 for Stage Separation & 2nd Stage startup.
*AG4 for fairing separation.
7. AG2 off to allow the 2nd to keep going (2nd stage flight control still WIP).
8. Put VTOl back at level to deploy grid fins.
9. AG7 to take control of the grid fins.
*from here, try to land the booster softly (Landing legs r still WIP:((
enjoy!
@CYBERBEAST I don't really understand what you mean
But I guest u have some problem with downloading mods (if this is not what you mean, let me know)
Btw this hopper has no mod at all
So you don't accually have to download any mods 4 this
Can anyone teach me how to change the engine's flame color using Overload mod!
Say I wanted to change the flame to "dark grey" then what code should i fill in ExhaustColor tag?
Festo needs to know your location
+2Thanks @CrimsonOnigiri for the support. Shin is somewhat underrated outside Japan and it is rare for people to mention it!
+1LETS GOOOOOOOO!!!!!!!
Welp might be back working on my goji then
@rexzion ye
qUaliTy
No separating jaw (yet)
Scale 1:5
Noted. Thanks everyone for the suggestions.
Btw any advice on how to scale up the entire model?
Also how screenchots on mobile?
Been a while since someone made a decent Starship. Damn nail the control!
@winterro Thanks, being a fan of bio - mechanics recently. Love your works.
@winterro
Object in image are shorter than they appear
@Nintendo
Guest imma leave a comment and see if i can finally build a proper rocket without using jet engine :))
Thanks alot @CrashFighter05
Thks everyone!
@Starmang10 if I DID copy or get the idea from someone else, i would make a credit for them :))
@Starmang10 I did not trying to copy from anybody. This craft was purely make by me. Rockets do have some similar feature sometime :))
@MrTyTheGreat Thks
Btw your launch vehicles are amazing!
AG5 to deploy Chute
AG6 to deploy Main Parachute
Flight profile:
1. Put trim up at max, pull VTOL down.
2. AG1 for Main engine start up.
3. AG3 to release the Launch clams (it's best to release the vehicle 5s after Main engine start up!).
4. Use Pitch & Roll control to gimble the nozzle. To roll, use Yaw control.
*MECO start at 450 mph
5. To Execute MECO, put the trim back at 0 (which is right in the middle),then AG1 off.
*Right after MECO, pull the trim back up.
6. AG2 for Stage Separation & 2nd Stage startup.
*AG4 for fairing separation.
7. AG2 off to allow the 2nd to keep going (2nd stage flight control still WIP).
8. Put VTOl back at level to deploy grid fins.
9. AG7 to take control of the grid fins.
*from here, try to land the booster softly (Landing legs r still WIP:((
enjoy!
This craft was accidentally upload twice
@Nickr I did add pitch
Maybe sthing went wrong
@CYBERBEAST I don't really understand what you mean
But I guest u have some problem with downloading mods (if this is not what you mean, let me know)
Btw this hopper has no mod at all
So you don't accually have to download any mods 4 this
Oh and btw, forgot to mention, that the engine power will use trim instead of using normal control
Can anyone teach me how to change the engine's flame color using Overload mod!
Say I wanted to change the flame to "dark grey" then what code should i fill in ExhaustColor tag?
Cheat Hax
Infdev.
@Treadmill103 Thks
General Kenobi!
Hello from DarkPK
Good job for your first craft
@CptJacobson sure!