Profile image

Piper PA-18 Super Cub

227k jamesPLANESii  3.7 years ago
Auto Credit Based on jamesPLANESii's Piper PA-18 Super Cub

The Iconic Bush Plane



Just under 2 years ago I built Ron Kuzina’s Super Cub, but since then, new things were added to the designer and my building skills have progressed, and I really wanted to make a new Cub, and one that was my own custom Cub.
So I’ve come up with this. This is the most accurate and detailed Super Cub on the site so far, and I’m extremely proud of this.


Unlike my Cessna 180, this cub isn’t very stock. Modifications compared to a typical super Cub include an extended baggage area, a larger rear window, a belly pod, 35” tyres, and an Angle of Attack indicator.
However, apart from them, this is basically a stock Super Cub. The wings are stock, and so is the engine. There is added tray from the tyres and so the cruising speed has been reduced to about 105 knots (rather than 115 for a stock cub). I did this to keep flying this thing a challenge.


Controls:

  • VTOL down: flaps
  • Act 1: Door
  • Act 2: landing lights
  • Act 7: Parking brake (Anchor on float version)
  • Gear: Water Rudders (Float version only)
  • Act 8: Master switch, engine ignition etc

Flight

Note that this has a highly comprehensive flight model, including prop wash, prop torque, P-factor and all that fun stuff. So, flying this has it’s quirks if you’re not used to flying planes in flight simulators.
At least medium physics level is required to fly this plane. (Curse you wobbly joints!)

Takeoff:

This is a taildragger, which means it can easily ground loop. P-factor and the spinning airflow from the prop can easily catch you off-guard. Right rudder is needed to counteract these effects on your takeoff roll.
Make sure you’re quick with the rudder to keep going straight and not ground loop. Small movements help.
Take off at about 45 kts.

Flight

75% throttle for cruise.

Landing

Landing is pretty easy. Approach at about 45 kts, or keep the AoA indicator showing full green, but not yellow. Full flaps, cut throttle when you touch down.


Pictures









Link to float version!

Link to white and blue version!

Link to SavageMan's Cub!

Enjoy!

General Characteristics

  • Predecessor Piper PA-18 Super Cub
  • Successors 2 airplane(s) +28 bonus
  • Created On Windows
  • Wingspan 35.2ft (10.7m)
  • Length 23.4ft (7.1m)
  • Height 9.9ft (3.0m)
  • Empty Weight 1,454lbs (659kg)
  • Loaded Weight 1,702lbs (772kg)

Performance

  • Power/Weight Ratio 27.725
  • Horse Power/Weight Ratio 0.763
  • Wing Loading 5.9lbs/ft2 (28.6kg/m2)
  • Wing Area 291.0ft2 (27.0m2)
  • Drag Points 1334

Parts

  • Number of Parts 1814
  • Control Surfaces 7
  • Performance Cost 6,560
  • Log in to leave a comment
  • Profile image
    165 ZachG907

    Vr version?

    18 days ago
  • Profile image

    @Xushunran Nice!

    1.2 years ago
  • Profile image
    102 Xushunran

    I have a RC Piper cub j3

    1.2 years ago
  • Profile image
    102 Xushunran

    I think it will nice(I’m a Chinese,my English is not good)

    1.2 years ago
  • Profile image

    @Rustdui95 I've simulated the rotating prop wash over the tail. Use rudder go keep it tracking straight.

    +1 1.5 years ago
  • Profile image

    Really like this build but as soon as it spawns it just spins in circles to the left

    1.5 years ago
  • Profile image

    Ooh, this was really fun to blow up my phone with!

    +1 1.6 years ago
  • Profile image
    180 F8boa

    I see, thanks. @jamesPLANEScdxxLXIX

    1.6 years ago
  • Profile image

    @F8boa Nah it's simulating the spinning prop wash. I've got a jet in the tail angled slightly so it pulls to the left on takeoff. It's realistic.

    1.6 years ago
  • Profile image
    180 F8boa

    The front wheels are off a bit I think, it keeps going to the right on the runway, as soon as it spawns, it turns to the right by itself.

    1.6 years ago
  • Profile image

    Keep up the good work.

    1.9 years ago
  • Profile image
    300 DrPanda

    lol i have a piper pa-28 but rc

    2.2 years ago
  • Profile image

    good air

    2.8 years ago
  • Profile image

    @AN2Felllla I guess so lol

    2.8 years ago
  • Profile image

    @OnePointEightLiterV8 absolutely zilch

    +1 2.8 years ago
  • Profile image

    I wonder how many parts were kept from the bush plane lol But nice work!

    2.8 years ago
  • Profile image
    9,810 Rasool0Asaad

    How do you build it? I Really hope i was good as you? "And I'm extremely Proud of this" Lol i wish i was proud of one of my builds,Congratulations On Being that Good lol,I wonder How can i get that good at building?

    3.2 years ago
  • Profile image

    @thelevidude Thanks!

    3.3 years ago
  • Profile image

    Epic work! This airplane is so nice I’d upvote it twice if I could!

    3.3 years ago
  • Profile image

    @nomalnormaltheman Air brake with a really high max input, and input set to an activator

    3.4 years ago
  • Profile image

    @jamesPLANESii how to male anchor? i wanted to make anchor for SavageMan a321 you know SavageMan A321 and sp water phisyc is really not good i mean you land in the water and the plnae just keep going fast

    3.4 years ago
  • Profile image

    @lianken No there isn't unfortunately... :/
    My graphics card is an Nvidia GT930MX. It's alright for gaming but it sucks with simulators.

    3.5 years ago
  • Profile image
    33.8k TheGliderGuy

    Dare @jamesPLANESii some time ago i made a glider and you gave me feed back wel i made it beter can you take a look at it .

    3.5 years ago
  • Profile image
    41.8k Ren

    @jamesPLANESii
    Oh ok. I'll keep up my search.

    3.5 years ago
  • Profile image

    @KnightOfRen Not right now sorry

    3.6 years ago
  • Log in to see more comments