Profile image

Aeromotive 5C-2

6,356 Aeromotive  4.0 years ago
277 downloads

A heavy fighter of radically different design with amazing performance. The engines are close together to minimize thrust-induced yaw in engine-out situations. Excellent armament consisting of 3 cannons and 2 machine guns located below the nose. The aircraft is extremely resilient, capable of handling more punishment than any other aircraft we have produced so far, including our bombers.

The 2 AEM-1 powerplants are equipped with WEP systems, allowing extra boost in combat situations. With WEP engaged, record-breaking performance is enabled. And the true potential of this machine is shown. To provide cooling during these high power demands, 4 large radiators have been installed in the wing, 2 for each engine.

VTOL down for flaps
Trim supported
Throttle > 90% for WEP

Specifications

Performance
Top speed: 840 km/h at 5000 m
Stall speed: 180 km/h
Powerplant: 2x AEM-1W inverted supercharged V-10 engines, maximum output of 1,750 hp (1,305 kW) each

Armament
- 3x 38mm autocannon
- 2x high velocity machine guns

Pilot's notes
Use WEP sparingly, it consumes exponentially more fuel. Only activate it when absolutely necessary.

Spotlights

General Characteristics

  • Created On Windows
  • Wingspan 44.2ft (13.5m)
  • Length 38.5ft (11.7m)
  • Height 13.4ft (4.1m)
  • Empty Weight 9,959lbs (4,517kg)
  • Loaded Weight 14,553lbs (6,601kg)

Performance

  • Power/Weight Ratio 1.853
  • Horse Power/Weight Ratio 0.24
  • Wing Loading 34.5lbs/ft2 (168.3kg/m2)
  • Wing Area 422.1ft2 (39.2m2)
  • Drag Points 4095

Parts

  • Number of Parts 171
  • Control Surfaces 9
  • Performance Cost 764
  • Log in to leave a comment
  • Profile image
    6,356 Aeromotive

    @PlanesOfOld Tried that as well, but for some reason the props still kept blowing up. And I agree this layout is a very good alternative.

    4.0 years ago
  • Profile image
    43.9k PlanesOfOld

    @Aerofy To stop the guns hitting the props, they either have to be right behind the props so the bullet spawns infront of it, or you can use the overload mod to disable part collisions on the props- it should make them invulnerable to bullets.

    IMO putting the armament there under the nose was for the best.

    +1 4.0 years ago
  • Profile image
    2,376 TheKraken3

    @Aerofy Custom wings are love, custom wings are life.

    4.0 years ago
  • Profile image
    6,356 Aeromotive

    @TurtlesThatFly Thank you :). The armament was kind of a hassle, at first I wanted machine guns on the wing's leading edges but those kept hitting the props. I'm glad with how it turned out in the end tho.

    +1 4.0 years ago
  • Profile image

    BTW, I like the creative placing of the armament below the wing, as well as the use of a stock cockpit. Well done!

    4.0 years ago
  • Profile image
    6,356 Aeromotive

    @TurtlesThatFly Spot on.

    4.0 years ago
  • Profile image

    It's like the XF5F's bigger, meaner cousin.

    4.0 years ago
  • Profile image
    6,356 Aeromotive

    @TheKraken3 Yeah you're right, there's not enough contrast as I suspected. Btw the custom surfaces was a good read, but it's really overkill for the style I'm going with.

    4.0 years ago
  • Profile image
    2,376 TheKraken3

    @Aerofy Black plane on black asphalt, not a good idea, try it on some grass or in mid air over the sea maybe

    +1 4.0 years ago
  • Profile image
    6,356 Aeromotive

    @TheKraken3 Definitively helpful, although the sunset screenshots are usually too dark for my builds. What do you think of these screenshots of an unlisted version?

    4.0 years ago
  • Profile image
    2,376 TheKraken3

    @Aerofy Tried this?
    https://www.simpleplanes.com/Forums/View/1161212/Asteroids-guide-to-great-screenshots

    4.0 years ago
  • Profile image
    6,356 Aeromotive

    @TheKraken3 Thanks man. I often spend a lot of time on getting the right angle for the screenshots and somehow always end up unsatisfied with them lol.

    +1 4.0 years ago
  • Profile image
    2,376 TheKraken3

    Oh, also try to make custom wings, they will improve your builds exponentially,

    https://www.simpleplanes.com/a/rKcn40/Example-Tapered-wing-with-custom-surfaces

    here's a guide

    4.0 years ago
  • Profile image
    2,376 TheKraken3

    I honestly don't know why you get so few upvotes, your builds are great. Maybe its the screenshots? Or maybe you should make jets?

    4.0 years ago