RA-2 "Badr" 157mm
The RA-2 is the Improved version of the RA-1, What is unique about this version is that due to the prevalent similarity between this and the RA-1 is that the upgrade process is much more easy and can Infact be sent out to the units without needing them to be delivered back to the Factory, Upgrade kits can be sent through military logistics and directly to the unit which has the RA-1 in service, The whole process can be completed in 4 Hours under adequate suitable conditions. However this is only for the Gun elevation improvements, everything else that is new on this can be done on the RA-1 without the need of an upgrade kit.
After understanding the very important need of more elevation, and learning from the crucial Achilles heel of the RA-1 during the Artillery Weapons test conducted by the Paternian Armed Forces, Hamra Defence Developments sought to fix the issue in the next version, The RA-2 was officially concluded.
-:CONTROLS:-
AG1 to move the Gun around, TRIM+VTOL, AG6-7 to fire.
AG2 will activate the Grabbers that will stabilise the Artillery.
AG3 will activate the Machineguns, TRIM+VTOL.
Credit to Pilotmario for the Star and Crescent! And thanks to JakeTheDogg for his design efforts on the RA-1 which provided the base for this :) also ChunderDownUnder for his gun and barrel!
Specifications
General Characteristics
- Created On Android
- Wingspan 16.8ft (5.1m)
- Length 30.8ft (9.4m)
- Height 20.2ft (6.2m)
- Empty Weight 16,498lbs (7,483kg)
- Loaded Weight 18,359lbs (8,327kg)
Performance
- Wing Loading 1,977.6lbs/ft2 (9,655.4kg/m2)
- Wing Area 9.3ft2 (0.9m2)
- Drag Points 11362
Parts
- Number of Parts 445
- Control Surfaces 0
- Performance Cost 2,110
@AdrianFlyingAce interesting.
@AdrianFlyingAce This is intended to be on the battle field, Usually a bit further than conventional artillery, + This hull is not as armoured as a tank hull, it's just a chassis
Nice!