rotators that dont have input can flex to a certain degree apparently. so i made torsion bar suspension. turns out they are softer than i thought they will be so you dont need that much to work. it can probrably work with 3 rotators per wheel. and yes i just slapped a panzer iv f2 turret on it. side note, its extremely good at climbing walls if you set the engines to 600 horse power. controls: pitch for forward and back. roll for turning. use camera to aim
Specifications
General Characteristics
- Created On Android
- Wingspan 13.2ft (4.0m)
- Length 23.7ft (7.2m)
- Height 11.3ft (3.4m)
- Empty Weight N/A
- Loaded Weight 20,122lbs (9,127kg)
Performance
- Wing Loading N/A
- Wing Area 0.0ft2 (0.0m2)
- Drag Points 6755
Parts
- Number of Parts 384
- Control Surfaces 0
- Performance Cost 3,493
@erridkforname i already figured it out
@Zead you need 2 engines. one for the right side and one for the left side. for left engine, its Pitch1 + Roll1. on right side its Pitch1 qnd Roll-1
How did you do the tank steering?
I tried and failed, while using the same input
Pitch1 + Roll-1
now, the next thing i will test is the rotation dampening thing for rotators. i will see if it can make it stiffer or softer