Andrew decided to call the new inputs system I cooked up "funky trees". Somehow escapes me why, but I'll roll with it. Here I'll describe what you can do in the land of funk.
Essentially what this means is that you can enter any mathematical expression (following this syntax) into an input field and it will be evaluated every frame. You can pull in data from a variety of sources, and process these how you like.
Inputs
What you can now do is use the normal input axes:
Pitch
Roll
Yaw
Throttle
Brake
Trim
VTOL
LandingGear
FireGuns
FireWeapons
LaunchCountermeasures
Activate1
Activate2
Activate3
Activate4
Activate5
Activate6
Activate7
Activate8
Flight data
In addition to this you can access some information from the aircraft:
Altitude
- Aircraft's altitude in metresAltitudeAgl
- Aircraft's altitude above ground level in metresGS
- The speed relative to the ground (m/s)IAS
- The speed relative to the air, adjusted for the desnity of the air (m/s)TAS
- The speed relative to the air (m/s)Fuel
- The amount of fuel remaining as a proportion of capacity (0 to 1)AngleOfAttack
- The angle of attack (angle airflow vertically meets the boresight) in degreesAngleOfSlip
- The horizontal equivalent of angle of attack (degrees)PitchAngle
- The pitch of the aircraft (degrees)RollAngle
- The roll of the aircraft (degrees)Heading
- The heading of the aircraft (degrees)Time
- The time since the level loaded (seconds)GForce
- The acceleration and gravitational "force" acting on the cockpit in G. I know it's not a force. Shut up.VerticalG
- The signed vertical component of the "G Force".SelectedWeaponName
- The name of the selected weaponLatitude
- The North/South position of the craft (metres)Longitude
- The East/West position of the craft (metres)PitchRate
- The pitch angular velocity in degrees/secondYawRate
- The yaw angular velocity in degrees/secondRollRate
- The roll angular velocity in degrees/second (these 3 inputs are better than usingrate(PitchAngle)
etc, because they account for wrapping around the angle, as well as being in local space:rate(Heading)
is different toYawRate
)TargetSelected
-true
if a target is selected, elsefalse
.TargetHeading
- the heading to the selected target in degrees.TargetElevation
- the vertical angle to the selected target in degrees.TargetDistance
- the distance to the selected target in metres.
Constants
Values that are always the same:
pi
the mathematical constant pi (half a tau, if you will).e
the mathematical constant e.true
a true boolean valuefalse
a false boolean value
Operators
These are useful for... maths or something.
- Mathematical:
- +, - addition and subtraction (- can be used as a unary operator, for instance
-Pitch
- *, / multiplication and division
- +, - addition and subtraction (- can be used as a unary operator, for instance
- Comparison:
- <, > less than, greater than
- <=, >= less than or equal to, greater than or equal to
- ==, != equal to, not equal to
- Boolean:
- &, AND
- |, OR
- !, NOT (this is a unary operator)
- Ternary operator:
condition ? value_if_true : value_if_false
- this chooses between two values based on the condition.
Functions
Finally, there's some helpful functions to do maths for you!
abs(x)
- The absolute (positive) value of x.ammo(name)
- The amount of ammo of the weapon withname
. Remember to put the name in " quotes.ceil(x)
- x rounded up to an integer.clamp(x, min, max)
- x clamped between min and max.clamp01(x)
- Equivalent to clamp(x, 0, 1).deltaangle(a, b)
- The shortest angle delta between angles a and b in degrees.exp(x)
- Returns e raised to the power of x.floor(x)
- x rounded down to an integer.inverselerp(a, b, x)
- Calculates the linear parameter t that produces the interpolant value within the range [a, b].lerp(a, b, t)
- Linearly interpolates between a and b, by a proportion of t.lerpangle(a, b, t)
- Similar to lerp, but interpolates correctly when values pass 360 degrees.lerpunclamped(a, b, t)
- Similar to lerp, but doesn't clamp the value between a and b.log(x, p)
- The logarithm of x in base p.log10(x)
- Equivalent to log(x, 10).pingpong(x, l)
- "Ping-pongs" the value x so it is never larger than l and never less than 0.max(a, b)
- The largest value between a and b.min(a, b)
- The smallest value between a and b.pow(x, p)
- x raised to the power of p.repeat(x, l)
- Loops the value x so it is never larger than l and never less than 0.round(x)
- Rounds x to the nearest integer.sign(x)
- The sign of x (1 if x positive, -1 if x negative)smoothstep(a, b, t)
- Similar to lerp, but with smoothing at the ends.sqrt(x)
- The square root of x.sin(x)
- The sine of x (degrees)cos(x)
- The cosine of x (degrees)tan(x)
- The tangent of x (degrees)asin(x)
- The arc-sine of x (degrees)acos(x)
- The arc-cosine of x (degrees)atan(x)
- The arc-tangent of x (degrees)atan2(y, x)
- The angle in degrees whose tangent is y/x. In other words the angle (argument) of a vector
Memory Functions
These are functions that are special because their output not only depends on inputs but their previous state.
- sum(x)
- Returns the sum of all it's inputs over time (the integral of x)
- rate(x)
- Returns the rate of change of x relative to its value last frame (the derivative of x)
- smooth(x, t)
- When loaded, it's output is set to x
. As x
changes, the output tries to move to x
, but at a rate of no greater than t
. This is vaguely equivalent to changing the speed of a rotator.
- PID(target, current, p, i , d)
- Evaluates a PID controller with the setpoint of "target", process variable "current" and the gains p, i, and d. Equivalent to: p * (target - current) + i * sum(target - current) - d * rate(current)
With all of these at your disposal, I'm excited to see what kind of contraptions you guys come up with, and I'm also open to some suggestions as to some things that could be added.
-WNP78, your funk master.
I'm trying to make a funky tree rotator from somebody else's build a sub assembly, but when I drag out the rotator onto my build, it doesn't work at all. Anybody have any suggestions?
Hi I'm gonna ask some question
It is possible to make auto dump flares??(Like on F-111 in War thunder)With Funky tree??
@Stephen22 if you mean a ammo cap just set burst count to 1000 then set "TimeBetweenBursts" to 9E+37. If you mean 1000 rounds a second then put that in there if you mean 1000 per minute divide 1000 by 60 then put that number hope this helped good luck
@Stephen22 if you mean a ammo cap just set burst count to 1000 then set "TimeBetweenBursts" to 9E+37. If you mean 1000 rounds a second then put that in there if you mean 1000 per minute divide 1000 by 60 then put that number hope this helped good luck
Can someone give me the thing to be able to have it so my machine gun has 1000 rounds. It's the machine gun so it doesn't have a name
@Kerbango Look at the code for the in game hornet aircraft you should be able to steal that.
How do I get a Hinge rotator to go back to the 0 position without having to decrease throttle? And then it goes back to the max position at a constantly repetitively (For an ornithopter)
@Magma1358 use AngleOfAttack. It outputs AOA
@SirMonzue Here post the plane I'll see what I can do idk much but I can try
Can someone help please. I've been working in this all day and can't figure it out.
I have some doors that open for a Fuel Probe. However I need the doors to have a delay before when closing. It is set on Activate2. Can someone help please!
How do I show the AOA on screen
Is there an Funky trees input that we can use to turn on an indicator (light input or label) when an enemy locks on?
this crap can fry my brain in under a second just by looking at a funky tree plane
@Speedhunter i just had to figure out how to get the mod function. never needed it before in my 7.5 years of playing this game. what a coincidence :0
turns out the repeat() function does exactly that ^^
How much of this functionality and syntax for inputs is also usable from a funk block? Ideally it would be the same across both as made sense
@WNP78
Actually, it might be easier just to show you what I mean on an unlisted post, if that's alright with you.
@WNP78
Thanks!
Another question,
I have:
{GunRateButton != AcmCover?"<alpha=#FF><color=#FF0000>HI":"<alpha=#20><color=#000000>HI"}
{GunRateButton != AcmCover?"<alpha=#20><color=#000000>LOW":"<alpha=#FF><color=#FF0000>LOW"}
How can I make it so if
AcmCover
is turned on then GunRateButton is turned on, whenAcmCover
is turned off it still displaysLOW
?Sorry if this is difficult to understand, I didn’t explain it very well.
ALSO, would you mind how I could use the same
{value ? "" : ""}
format with which weapon is selected… if you don’t mind? :)
@LoneSpaceGaming with boolean values,
!=
is logically equivalent to XOR@AristocraticFeelings
It should be:
{(TAS < 270) & (AltitudeAgl > 0) ? "<alpha=#80>STALL" : ""}
Make sure you are using "" and not “”
I’ll go check that this works.
Edit: It works. And if I were you I would personally use AoA instead of airspeed, but you do you. Also, I would suggest lowering the stall speed WAY down.
Is there anyway to have XOR?
@EJBoss97
I don’t think you can change inputs on things like that.
is there a way to use variables to make a countermeasure pod fire off when the machine gun input is pressed?
@WNP78 is there a modulus operator? (akin to % in other programming languages)
Where I can say
((ammo(name)%2) == 1) ? FireWeapons : 0
Basically the input FireWeapons only works when the number of ammo is an odd number
@darthgently in SP there is a menu you can open that allows you to create custom craft-level variables. You can enter the name of the variable, followed by a value it will be set to every frame. If you press the button to expand the full properties, you can also set an assignment priority that can change how it will act if the same variable is written to from multiple places, and also a condition which the variable will only update if said condition is true. In order to "set" a variable when something occurs, you can just make a setter with the condition set to only run that line when the condition is true.
I was reading that wrong. That clarifies. But what is this "variables system" you refer to? Variables can be assigned within funk? As in not just assigning the result of funk in a set variable block?