Have the leading edge block taper towards the tip;
Adjust the triangle block so that its front side is as tall as the wing should be thick at root and be zero units wide. Rear side should be as tall as the wing tip is thick and as wide as the wing is long;
Place front end of the triangle block onto the leading edge block so that it points forward, and align the point with the root;
Adjust "run" and "length" of the triangle block to fit the leading edge block;
Add custom control surfaces to the rear of the triangle block on rotators;
Profit.
I have added another block to the rear of the triangle block to get a smoother airfoil. That is recommended but not mandatory. Fuselage inlets flipped onto their sides are recommended for custom surfaces in order to give you trailing edge sweep by editing inlet angle.
As an Australian I can confirm that's true
+9salt is superior molecule there for is always first
+7https://www.simpleplanes.com/a/rKcn40/Example-Tapered-wing-with-custom-surfaces <3
+5How to create this kind of wing:
Have the leading edge block taper towards the tip;
Adjust the triangle block so that its front side is as tall as the wing should be thick at root and be zero units wide. Rear side should be as tall as the wing tip is thick and as wide as the wing is long;
Place front end of the triangle block onto the leading edge block so that it points forward, and align the point with the root;
Adjust "run" and "length" of the triangle block to fit the leading edge block;
Add custom control surfaces to the rear of the triangle block on rotators;
Profit.
I have added another block to the rear of the triangle block to get a smoother airfoil. That is recommended but not mandatory. Fuselage inlets flipped onto their sides are recommended for custom surfaces in order to give you trailing edge sweep by editing inlet angle.
+5Fake. X4JB has shown me the true way
+4Fake
+4The plane is nice, but the control surfaces seem to manifest themselves outside of the fuselage covering the wings. I can’t upvote because of this.
Invest in custom control services
+4@RAF12fan w8 they havent added mods to IOS yet?
+4That Bi-plane is fake, its just hologram like Australia @Awsomur
+3Aw man
+2Early congrats on Plat
+2Thanks m8 @BlackhattAircraft
+2https://www.simpleplanes.com/a/rKcn40/Example-Tapered-wing-with-custom-surfaces
+2Just in-case i leave this with you
+2https://www.simpleplanes.com/a/rKcn40/Example-Tapered-wing-with-custom-surfaces @Marine
also very nice photo
+2yep i do mean that @Ergi @Bife
+2ooga booga
+2W8 what happened to my comments OOF
+2OOf
+2feels like the french slapped a Kirov and Dunkerque together
+2Have your tried pitching up while take off, unfortunately simple plane's physics hates this plane quite a bit @Notnoob1000
+2Thank you @Spacedoge12345plane @Jacobdaniel
+2im pretty sure they are called rockets and they dont track targets : ) @NeonEndo
+2No, I know your not picking on the new guy, I also have been paying attention @F104Deathtrap
+2@randomusername indeed it is
+2LMAOOO
+1Congrats on bronze
+1Thank you again @ImColin I hope you enjoyed this build the most
+1Thank you, @ImColin :)
+1Lit
+1Np @Falcon2468 : )
+1Np @ThomasRoderick : )
+1The panic when you run out of sppoootlights xD
+1N
+1O
P
R
O
B
L
E
M
: )
@Adanene
Don’t worry I believe the SP community is quite tame and also np@AaronSonAirCrafts! :)
+1You'll get there, getting upvotes is always a challenge even for us xD @Ztans97
+1Max Spotlights again >:(
+1congrats on bronze :)
+1good luck on your hunt for description stuff
+1lol thanks @TAplanes
+1Thank you @Strucker !
+1@Strucker
+1@USSR @Brayplane101
+1@logizAircrafts @Bife @JamesBoA
+1Np! @Adanene
+1Np @DemXu! : )
+1UPPPDOOOOOOOOOOOOOOOOTTTTTTTTTTT!1!1!1!
+1Np! : )
+1@SimpleEric
Thank you for updooting @Mmdben @belugasub @JohnnyBoythePilot
+1Should i explain, fine i will: The problem is simple it is right here but now it is fixed @Mmdben
+1