Unlisted
No Tags
Auto Credit Based on ThePilotDude's TPD Mountaineer
ACT 1 for instrument lights and ADI, ACT 2 for exterior lights. VTOL for flaps
Specifications
General Characteristics
- Predecessor TPD Mountaineer
- Successors 1 airplane(s)
- Created On Windows
- Wingspan 38.6ft (11.8m)
- Length 28.6ft (8.7m)
- Height 9.8ft (3.0m)
- Empty Weight N/A
- Loaded Weight 961lbs (436kg)
Performance
- Horse Power/Weight Ratio 2.079
- Wing Loading 2.8lbs/ft2 (13.8kg/m2)
- Wing Area 339.7ft2 (31.6m2)
- Drag Points 6259
Parts
- Number of Parts 553
- Control Surfaces 7
- Performance Cost 1,953
Great fun, I did mostly flight performance. Was amazing for touch and go's, managed to get it to fly at 30 mph without losing altitude.
@DepressedTortoise
sorry about that, I misspelled your name earlier
Sweet!
@JamesPLANESii
@CRJ900Pilot
Ok, my feed back is listed here. I have not read all the other comments (yet) so I may repeat stuff!
1) the line that goes down the center, make it the tiniest bit thicker, right now it’s like a piece of paper.
2) I’m not sure if I’m right here, but it believe the strobe light is supposed to be put as far back on the plane as possible
3) make some type of support beam/wire for the tail boom, in my opinion I think it will look better with a small wire thing.
4)tag me when you release it!
Over all, great plane! I love the flaps and the look!
Thank you, feedback would be nice as I might post tomorrow @ThePilotDude
@Chancey21 thanks! And sure, I can do some testing
Will you do a bit of testing for me? @ThePilotDude
Look for high drag areas, and then [IN OVERLOAD] change
dragScale=1todragScale=0@ThePilotDude@Chancey21 how would I go about changing the drag to "1500"
Thanks for the tips!
-Feedback-
-Lettering is excellent, the "M, O U and N" as well as the design closest to them need to be more flush with the fuselage
-Width of glass needs to be zero
-chairs look super uncomfortable (add cushions etc)
-Trim is awful
-Cockpit view needs to replace camera 1 and delete camera 1
-Too maneuverable, edit the
maxDeflectionDegree-WAY to easy to nose over, decrease
brakeTorqueuntil the tail JUST comes up at full brakes-Love the Livery, needs to be a smidge brighter
-Reduce drag to around 1500
-reduce engine power to around 150 HP
-Make the prop a Fixed Pitch prop
-Wing Loading needs to be closer to 5.0 Instead of 2.8
@Chancey21
@ACEPILOT109
@DepressedTortise